Search found 11 matches

by Timothy
Sat Oct 29, 2022 9:04 am
Forum: Hangar Chat
Topic: Which countries permit permits?
Replies: 6
Views: 5605

Which countries permit permits?

I understand that France grants blanket permission for PtF aircraft from the UK (a reference would be good, please).

Which other countries do so?
by Timothy
Thu Oct 20, 2022 10:27 am
Forum: Hangar Chat
Topic: BANK FRAUD. The elephant in the room?
Replies: 6
Views: 5469

Re: BANK FRAUD. The elephant in the room?

After the full and open report we read yesterday, is there much more to be said?

Lots of intelligent and diligent people are successfully defrauded every day. Don't let us victim-blame.
by Timothy
Tue Oct 18, 2022 7:11 pm
Forum: Sales & Wants
Topic: Altitude encoder to a good home
Replies: 0
Views: 3737

Altitude encoder to a good home

My AK-350 altitude encoder kept dropping to zero then returning. I eventually gave up and fitted a new one. I have now opened up the old one and there is evidence of a powder, which may be corrosion or spillage, around the feet of the output transistor and maybe one of the ICs. I don't have the incl...
by Timothy
Mon Oct 17, 2022 8:07 pm
Forum: Aircraft Construction & Maintenance
Topic: Noise reduction
Replies: 12
Views: 8724

Re: Noise reduction

Thank you. I feared as much!
by Timothy
Mon Oct 17, 2022 8:05 pm
Forum: Aircraft Construction & Maintenance
Topic: Help with overreading ASI
Replies: 7
Views: 4042

Re: Help with overreading ASI

On Pitot. But Altimeter and VSI worked fine throughout, only the ASI was affected.
by Timothy
Mon Oct 17, 2022 3:20 pm
Forum: Aircraft Construction & Maintenance
Topic: Help with overreading ASI
Replies: 7
Views: 4042

Re: Help with overreading ASI

Static pipe broken through. Fixed. Now perfect. Thank you.
by Timothy
Sun Oct 16, 2022 12:12 pm
Forum: Aircraft Construction & Maintenance
Topic: Noise reduction
Replies: 12
Views: 8724

Noise reduction

I have been long resentful that in the certified world it is not permitted (without the 5-6 figure cost of recertification) to be a good citizen and put four blade props and silencers on my MEP. Just for altruism. With the purchase of my lovely Emeraude, I am new to this whole uncertified world. But...
by Timothy
Sat Oct 15, 2022 9:55 am
Forum: Aircraft Construction & Maintenance
Topic: Help with overreading ASI
Replies: 7
Views: 4042

Re: Help with overreading ASI

I can try sliding back the canopy a bit.
by Timothy
Fri Oct 14, 2022 6:52 pm
Forum: Aircraft Construction & Maintenance
Topic: Glass DGI
Replies: 4
Views: 3351

Re: Glass DGI

Sorry, strictly I should have written replacing the mechanical DGI with a glass DI, but I think what I'll do is fit a Kanardia HORIS and have only a track reference. We will still have the magnetic compass if we need to know magnetic heading, but, for most purposes a track indicator will be fine.
by Timothy
Fri Oct 14, 2022 6:36 pm
Forum: Aircraft Construction & Maintenance
Topic: Help with overreading ASI
Replies: 7
Views: 4042

Help with overreading ASI

The ASI in my aircraft clearly overreads, by between 12 and 15 kts (12 at the slower end, 15 at the higher.) I know this for a number of reasons: 1. I have compared ASI and GPS groundspeed, on a calm day and going in different directions, and ASI beats GPS by 15kts. 2. Stall speed is 12kts above boo...
by Timothy
Wed Oct 12, 2022 8:17 pm
Forum: Aircraft Construction & Maintenance
Topic: Glass DGI
Replies: 4
Views: 3351

Glass DGI

I don’t know if this is a stupid question, but can you a glass DI? I don't have a GPS, so I can’t have a EHSI, nor do I want one, but my DGI is awful and needs replacement, and it seems a bit silly in this day and age to replace it with a mechanical gyro, when a digital one would work better, be lig...