Light Aircraft Association

Friend runs a 2100 in his D18, after a fair bit of work now runs bit on the cold side

What size engine?

what aircraft?
if its basic get a sheet of 18 alloy and make your own, cut several out of sheet if not happy with first.

Disagree Ben, reduced landing fee is a great idea. Airfield needs revenue so every little helps.£15 seems to be normal give or take. Leicester has a free landing which I will use. Would think about it at £15, unless you have a specific. reason to go. I don't fly PA 28, RV or Cirrus so limited budget.

Thank you Steve

my 1600 uses a 54 x 36 Newton goes very well
M

Hi Adam

Whats it for? I have a prop but fine pitch think its 30 x normal did

Mike

If your local welcome to try it

Sorry, should have explained thought I Had a good nitrate base wrong

As mike says, with butyrate, base of nitrate and then build with butyrate.
Very straight forward. Get it wrong disaster. Suffered this recently.

Got a set from Aldi less than £15 well worth for some jobs. Recently bought a set of Torx spanners from Toolstation, like Allen keys. Much better than those little things £6,
Mike

Morning Steve
So opened website saw Christmas closure message then main menu, for a mini minuscule second thought food
Would be nice if the forum link was on main page.

Happy Christmas

Mike
As Tony said

Hi Ian
I have a piece off alloy 4” x 5” 5mm thick which you are welcome too.
Wanted prop flange but this bit was too small.
If required message me with contact details.
Mike

eBay

Hi Mark

Made a couple over the years. Scrap bits of aluminium and rivets, work very well. Flap long bolt with flap attached and arm welded
to top.
Mike

1 thing I was pleased with, I made a small ignition panel that bolts onto back of instrument panel. Ie has switches buzzers and circuit breakers on it. Means you can remove instrument panel without disconnecting any wires.