Tachometer & CHT

These are matching 57mm right sweep instruments, zero on left.
Chinese (Falcon type) clones.
Used only for static bench testing SOLO 210 single cylinder 2-stroke with CDI.

Tacho scale 0-8000rpm
with connectors, original box and quality certificate.
for CD ignition.
£30

CHT ...

DIATEX 1500
86g/m2 (about 2.5oz/yd2) shrinkable polyester covering (Dacron)
Extra wide, 190cm (75"). French Ceconite equivalent.
http://www.diatex.com/uk/produits/aero/tissu.htm

I have some left over. All clean and dry, new and unused.

One whole uncut rolled piece 10 yds long (at least).
Costs ...

Aeroquip Firesleeve

I have some left over. New and unused.

AE102/624-AS1072-11
1 x piece 30" long and
1 x piece 41" long

AE102/624-AS1072-6
1 x piece 40" long

Costs new £6 odd per foot plus tax and plus shipping, so there is about £70 worth here. Email pic available.
Job lot only - £25 ...

Becker AR2008/25

720 Ch VHF VFR CatIII COMM 118.000 - 135.975 - 14 volt. 145 x 47 face. 1.3kg.
Manuals here: http://www.becker-avionics.com/manuals/Install_Operation_Manual_Comm_2000_Issue_04_82.pdf

Manufactured 1979
Unbroken Becker factory overhaul/repair seal dated 25/2/1994.
Last installed ...

For Sale

Panel Mount Compass
Ludolph
57mm panel cut-out
nice convex/domed face

£60 plus P&P at cost

email me for pic
drhurley AT onetel DOT com

For Sale

ASI
Winter 6FMS3 type
made 1965
Originally km/h but has been re-faced at some point
Now shows 30-130 knots
80mm panel cut-out

£ 50 plus P&P at cost

email me for pic
drhurley AT onetel DOT com

For Sale

Altimeter
Wultrad ALT20E type
80mm panel cut-out
knob at 7.30 position
3-pointer, feet/millibars
made 03/99

£ 100 plus P&P at cost

email me for picture
drhurley AT onetel DOT com

4-part seat harness
Gadringer-Gurte, originally from glider. All alloy fittings in good order, webbing is dated 03/1993, can be replaced, re-made to your length spec by original manufacturer, re-using the alloy fittings:
http://cms.gadringer-gurte.de/pages/en/belts/maintenance.php

Alternative ...

As Will says, these are in widespread use in cross-country soaring. Masses of useful info and comparative data on the Cumulus site here: http://www.cumulus-soaring.com/ start with the comparisons tag at the top of the home page.
Also subscribe to the http://www.gliderpilot.net/discussion group (u.r ...

As Will says, these are in widespread use in cross-country soaring. Masses of useful info and comparative data on the Cumulus site here:
http://www.cumulus-soaring.com/ start with the comparisons tag at the top of the home page.
Also subscribe to the http://www.gliderpilot.net/ discussion group (u ...

Try G & S Brough Ltd - good for all sorts of washers and gaskets, and will provide strips of felt I'm sure, good value too.

http://www.gandsbrough.co.uk/page3.html

Roger
CP WEST Ltd
Hereford

John

Call Mike Hutchinson, Glider Instruments, 01568 708368

Tried the usual suppliers (LasAero, Skycraft, Spruce etc) but no joy so far in finding replacement lampholders/receptacles for these lamps:
http://www.aircraftspruce.com/catalog/elpages/univreplacelamps.php
Grimes or Universal 7512-12. Any one got an idea of a UK supplier? Need just two.
Existing ...

Want to Buy wood or composite prop for concept mock-up asap
Ideally something 150-170cm diameter, modern sort of planform, chord not too wide. Can be broken (repairable), too-small (extendable), too-big (cut-downable), or just plain dogeared (repaintable).

Not for flight, just for the static full ...

Can be found in CAP393, Section 1, Part 3, Article 8(2), page 35 of 444
http://www.caa.co.uk/docs/33/CAP393.pdf
It does not say much, as you can see.

However, if anyone from HQ or Engineering is monitoring this it would be useful to have on the website (if one does not already exist and I just can ...