Light Aircraft Association

Hi Ian,

That's some very useful and time saving information.

Thank you so much.

We will go ahead with fitting a resistor as you described and see how we get on.

Many thanks,

Garic

Dear All, Have just been talking to "Dino" over at Sigtronics in California and he has confirmed that the SP 200 should not be muting the intercom when receiving inbound transmissions. He also confirmed that fitting the "optional" 1/4 or 1/2 watt resistor into the handheld radio headphone circuit sh...

Hi Ian, "yes", we installed the SP200 following the diagram for the Yaesu 750, as found on the Sigtronics website. The one bit we haven't implemented is the "optional" 1/2 or 1/4 watt resistor in the blue circuit for the aircraft headphone jack. The brown and white wires connect directly to the jack...

Hi Ian,

We have the SP200.

Cheers,

G

Dear Forum, We have recently installed a Sigtronics SP200 intercom and a Yaesu FTA 550 handheld 8.33KhZ compliant radio in our Jodel D1112. All functions are found to be working satisfactorily but, annoyingly, all inbound transmissions mute whatever is being said on the intercom. Not a problem if fl...

Hi John, Many thanks for your reply. I've talked to iCom, who were v helpful and they recommend insuring that the converter is wired directly to the battery rather than the solar power controller, which is what our current installation achieves. Wired directly to the battery, the radio works well so...

Hi John, the battery is only a couple of months old and is a yuasa 12v 7 ah sealed unit.

Hi All, we are in the process of replacing our trusty iCom A4 handheld radio with the 8.33 compliant A6e. The A4 was a straight forward 12v dc affair but the A6e has a requirement for 11v and comes with a 12v to 11v dc power source. We have a 12v 7ah battery trickle charged off a solar panel which q...