Anyone clearing customs in Calais tomorrow 27/06/2023 .. need parts dropped off for Uk aircraft stuck at Calais , many thanks Kevin 07547 919518

I started with a blank sheet of paper and copied a design demonstrated by my father , he fold d a few times and I copied , he then doubled the nose back to provide balance and threw the glider across the room and it flew perfectly. I then copied other successful plans scratch building balsa models ...

Mike is correct, If an external intercom is used it drops the ptt voltage ( only 0.7v )? .. so the fix is within the sygtronics mid linked above .. the ptt earth wiring is linked via a relay (also a diode as shown )..to provide a direct earth feed …
It is obviously a sensitive installation to the ...

Check out LAA TL 3.10 to see if your install meets standard aircraft practice within scope of that document
http://www.lightaircraftassociation.co. ... quired.pdf

Hi, if you read LAA TL3.10 and can comply as stated with standard aircraft practice then no mod is needed, regards, Kevin
http://www.lightaircraftassociation.co. ... quired.pdf

Hi , a while back Leg fairings were up for sale for Europa Xs Trigear , if still available please contact me thanks 07485 235512

If you have a Chobert rivet gun gathering dust in the back of your hanger or workshop that you would sell then please give me a call 07547919518
Regards
Kevin

http://www.battlefieldstrust.com/resource-centre/medieval/battleview.asp?BattleFieldId=51

Link is local area not the actual field.

Naseby is 15 min North of Northampton , 5 min from the Junction with the A 14 with the A508 Market Harborough road the (Well drained firm east west ) strip is near to ...

PS
I have access to an aircraft trailer if anyone needs help moving.

Hi I am offering my project as a Diesel engine test bed , for joint venture , please PM me if you have suitable development.
Example aircraft :- http://tagazous.free.fr/affichage2.php?img=6114

Airframe is substantially complete ber firewall forwards / fuel and instruments, in primer so custom paint ...

http://www.ignitech.cz/english/aindex.htm

These guys do this after market CDI that does the CX 500 and 4 cylinder bikes...other pages on the site lists trigers (Hall effect sensors etc)

and the Link below tells you what is in the box..

http://rajamolor.blogspot.co.uk/2008/06/honda-cx500-cdi ...

This Link has parts lists diagramns and warnings about crossfiring due to running leads too close together. http://www.molla.org/DIY-CDI/SC-DIY-CDI ... -hires.pdf

David (and all)

I have an open source cad drawing showind the design of a CDI system , listing components and conections,,,,, a competent person should be able to build one , your triggers will fire a pair of coil packs each with two leads out (wasted spark system).

pair it up with single mag ...

David, I will pm you for initial pictures and sizes, my suplier offers a fitting service to frame if required, for a reasonable fee, if your canopy is unservicable and he has not got a mould then your canopy could be shipped for them to create a mould.

Looking at pictures , your aircraft bubble is ...

UK Manufacterer now sourced for LAA / BMAA aircraft ( BGA Annex 2) please PM me with your requirements, ie aircraft make model , clear or tint, DV /ventilation panels etc.

During initial production we will need pattern canopies to create the moulds, so please retain all pieces of your scratched or ...