Light Aircraft Association

Hi Folks,

I have a circa 1960 Continental Packette PC60 engine (give or take a C90 internally but made as a GPU with different crankcase/ overhead induction w.h.y). I'm looking for a workshop manual for detail differences.

Thanks,

Mark

Hi Colin,

I have the detachable wing dwgs if that's any use?

Hi folks, I am aware that the LAA sell new plans (see initial post) but I am looking for an 'as new' unused set that might be gathering dust-there should be a few about. Having bought a set a few years ago and then bought a BA4B shortly afterwards, they lay fallow. I decided to sell them recently an...

.

12V electric T&S from Jodel and in VGC. Serviceable on removal. £75 or swap for similar condition vacuum type. ASI in knots and MPH with temp correction scale. As used on Piper Tomahawk (180 knot scale). Servicability unknown £20. Would swap for a VERY shallow depth ASI in knots. Venturi. About 12" ...

Having just sold my set a few weeks ago, I have come to regret the decision
Mrs S won't allow me to buy another new set (fair enough) so I'm looking for a second hand set in very good condition. If your have a set that is gathering dust, please email me at
[email protected]

3 Goodyear 380 x 150/ 15x6.00-5 which I believe are wider and larger than std so good for grass. Load limit 1600lbs 120 mph. I think from used mainly on gliders but a popular fit on RVs. The crown has been slightly worn through use but the treads are still deep and I would use. Destined for my now s...

Looking for a 'Cessna style' colour vac AI to replace a serviceable all black artificial horizon. It's for a Jodel so panel depth limited.

Ex MOD ~100 knot turn and slip . 24V but was run from a 12 V system using a small voltage converter (not supplied). Believed serviceable. Std 3.25" face x 5.25" deep, 1.1kg so pretty standard. p&p included. £30 posted

sharpyjen 'at' live.com

Unused as G-BVIS was built with a single spar after all. 2 sheets that are folded to A4 as received.

Mark

Thanks Stuart.

I can't be the first to ask this one! I am about to embark on a D140 project. Is there LAA approved equivalent material spec for those given with Jodel plans: Steel: XC18 at 42 Kg/mm (squared) A56 3e at 56 -------//----------- 25CD 4 at 68 -------//----------- ( 4130??) 30NC 11 at 85-------//-------...

Original and in good condition. £90 + Postage from Lincs (near Grantham). Include spar upgrade larger engine and increased AUW

Thanks, Mark Sharp

Mob 07793561682
Home 01476586119