English Wheel and Metal Shaping Course

For full information concerning the Coaching scheme please see the LAA web site.
Chairman of Pilot Coaching Scheme : David Cockburn
National Coach : Chris Thompson

Moderators: John Dean, PennySharpe

Post Reply
Gary Reid
Posts: 1
Joined: Sun Jun 07, 2009 11:51 am

English Wheel and Metal Shaping Course

Post by Gary Reid » Thu Jan 07, 2016 9:55 pm

Having seen the excellent English Wheel produced by Justin Baker at the 2015 LAA Rally I was intrigued to learn more about the skills needed to work sheet metal into complex shapes to make various fairings on my aeroplane build. Last week I completed a one day training course with John Ricketts of Quiet Bear Metal Shaping (www. quietbearmetalshaping.com). Not only did John bring along an English Wheel, but also within his van he had two shrinker/ stretcher machines, much bigger than any I had seen previously, and an electrically driven Jenny Roller. It was a full day course with John turning up at my house around 8:30 and working through to 17:30 with only a short break for lunch. John is very hands on and got wheeling sheet steel whilst he set up the other machines. I learnt a tremendous amount during the day, and John was very willing to offer constructive advice on how to correct my (many) errors. It was an excellent course and I cannot recommend John enough.
029868

cardiffrob
Posts: 370
Joined: Wed Jan 16, 2008 4:56 pm

Re: English Wheel and Metal Shaping Course

Post by cardiffrob » Tue Aug 02, 2016 10:59 am

I have similar kit here near St Athan if anyone fancies a play. No charge, just bring Dark Chocolate Digestives.

Rob

01446 795489
CF612GS
Rob Thomas
034851

Post Reply