For discussion on all aspects of the Single Seat De-Regulated, sub 115kg microlight aircraft category.
Moderator: John Dean
- Posts: 481
- Joined: Mon Jan 07, 2008 5:06 pm
- Location: Caithness
It depends on the thickness of the bulkhead you intend to install, but I would use Klegecell foam as the sandwich material. It is tough stuff.
- Posts: 84
- Joined: Sat Mar 12, 2011 3:47 pm
Balsa can soak up adhesive and the glue is heavier than the wood. Normally it would be used as a stiffener in a composite, for example glass fibre where it would be placed between layers of mat or cloth. In that application it works well giving great rigidity.
- Posts: 8
- Joined: Sun Mar 08, 2009 5:04 pm
- Location: Stansted UK
Excellent material. It needs to be integrated into the design properly. Sufficient design data exists in ANC-18. We use this as an alternative in several modern composite aircraft designs. Beware moisture ingress and absorbtion.