We'll be utilising a MGL EFIS/EMS (see: http://goo.gl/7XvrdK ) and wanted to preserve a low oil pressure indication (preferably gauge and/or warning light) on the Rotax 912S in case we have an EMS failure.
Could anyone suggest a simple way of achieving this?
Dual oil pressure indication on Rotax 912S
Moderators: John Dean, Moderator
-
- Posts: 64
- Joined: Thu Jun 07, 2012 7:41 am
Dual oil pressure indication on Rotax 912S
Richard Lyon
039795
039795
-
- Posts: 257
- Joined: Wed Jan 02, 2008 11:00 am
Re: Dual oil pressure indication on Rotax 912S
Hi
You could change the std VDO OP sensor supplied to one with additional 'With Warning Contact ' functionality, wired to illuminate a separate Low Oil Pressure warning light ie see pages 10 /11 or page 16 /17
http://www.partsforaircraft.co.uk/downl ... 20info.pdf
Or you could use the std VDO sender supplied and tee a separate std OP low warning switch into the OP line wired as above see page 22 /23
Regards
Steve
You could change the std VDO OP sensor supplied to one with additional 'With Warning Contact ' functionality, wired to illuminate a separate Low Oil Pressure warning light ie see pages 10 /11 or page 16 /17
http://www.partsforaircraft.co.uk/downl ... 20info.pdf
Or you could use the std VDO sender supplied and tee a separate std OP low warning switch into the OP line wired as above see page 22 /23
Regards
Steve
-
- Posts: 64
- Joined: Thu Jun 07, 2012 7:41 am
Re: Dual oil pressure indication on Rotax 912S
Many thanks, Steve - that's appreciated.
I realise that it's probably considered unnecessary, but, in theory, are there any other Rotax engine parameters we can simultaneously monitor on a standby instrument if the EMS fails? That is, beside RPM and Oil Pressure. Fuel pressure, for instance?
We were planning to use another item of MGL kit: http://goo.gl/VhPwWk to achieve this.
I realise that it's probably considered unnecessary, but, in theory, are there any other Rotax engine parameters we can simultaneously monitor on a standby instrument if the EMS fails? That is, beside RPM and Oil Pressure. Fuel pressure, for instance?
We were planning to use another item of MGL kit: http://goo.gl/VhPwWk to achieve this.
Richard Lyon
039795
039795
-
- Posts: 257
- Joined: Wed Jan 02, 2008 11:00 am
Re: Dual oil pressure indication on Rotax 912S
Water temp & oil temp?
Regards
Steve
Regards
Steve