Does anyone out there have a Mod on the Rans S6 rudder, to cause it to self centralize... I have heard some people have used bungee on the backs of the pedals fixed to the bulkhead, or springs attached to the rudder horns.
I would welcome any help with this matter...
Regards
Martin
Rans S6 Rudder
Moderators: John Dean, Moderator
-
- Posts: 1001
- Joined: Mon Feb 11, 2008 7:21 pm
Re: Rans S6 Rudder
it's quite common for aircraft designs to have springs or bungees from the rudder pedals to the bulkhead. Normally only be enough to tension the cables, not to centralise the rudder.
Does the Rans S6 have a problem in this respect?
Does the Rans S6 have a problem in this respect?
Ian Melville
032644
032644
Re: Rans S6 Rudder
Hi
Yes there is a bungee from the pedals to the nose wheel but when in the air this is not effective .
What i find is that because the Rans has such a large rudder the prop wash affects the rudder a lot and you end up chasing the ball , the slightest amount of input in one direction then throws the ball to far the other way and you spend more time yawing the plane in and out of a turn , this is not good in the circuit and maybe why a lot of crashes on finals have been but down to over rudder control and spinning into the ground
Martin
Yes there is a bungee from the pedals to the nose wheel but when in the air this is not effective .
What i find is that because the Rans has such a large rudder the prop wash affects the rudder a lot and you end up chasing the ball , the slightest amount of input in one direction then throws the ball to far the other way and you spend more time yawing the plane in and out of a turn , this is not good in the circuit and maybe why a lot of crashes on finals have been but down to over rudder control and spinning into the ground
Martin
Martin Lockett
042661
042661
-
- Posts: 1001
- Joined: Mon Feb 11, 2008 7:21 pm
Re: Rans S6 Rudder
If it's that bad the I would be asking the BMAA and or LAA for flight test reports to see if there is a comment on this matter. Also in the report for the G-MYES accident the LAA have a significant safety action point regarding handling, has this been done?
Strong centering springs would be a fudge, and should not be undertaken without approval.
Strong centering springs would be a fudge, and should not be undertaken without approval.
Ian Melville
032644
032644