JABIRU engined X-AIR HAWK. IGNITION noise.

The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering

Moderators: John Dean, Moderator

Post Reply
jim bolton
Posts: 2
Joined: Fri Mar 27, 2009 2:53 pm

JABIRU engined X-AIR HAWK. IGNITION noise.

Post by jim bolton » Fri Aug 14, 2009 4:43 pm

Operating from a strip within a zone and obliged to talk and listen to nonstop blather, the ign' noise is back every time an incoming signal lifts the squelch and varies with frequ' in use. The ngk DR9EA plugs have screw on caps and dont seem to do the job. Could it also be poor quality suppressed leads.? does anyone know of a better plug. The noise comes in via the aerial and the intercom is perfect. Cheers. [/img] :(
Top
Post Reply

Return to “Aircraft Construction & Maintenance”