Glass fuel filter. Mod required?

cardiffrob · Post by **cardiffrob** » Thu Sep 17, 2009 10:45 am

I had a look through the LAA site and google for it but had no luck. Isn't there a mod required that uses a spring to hold the filter in place? I seem to have lost the details. Has anyone got a link to it?

Cheers

Sandy Hutton LAA372 · Post by **Sandy Hutton LAA372** » Thu Sep 17, 2009 6:42 pm

Rob, it's MPD 2008 004. I keep the MPD's in my faves so not sure where it would be in the Engineering pages offhand. I'm sure you'll be able to locate it.

cardiffrob · Post by **cardiffrob** » Thu Sep 17, 2009 7:08 pm

Thanks. I've found it.

The new filter assembly I've got has a different method of holding the filter gauze in place and it has no separate nut since the new shaft has a cast-in flange instead of a nut. The only way to release the filter gauze is to physically remove both ends of the filter assembly completely. I guess this is a factory mod to cover the MPD?

Guest · Post by **Guest** » Tue Sep 29, 2009 10:15 pm

If any of you need the spring for the mod, I have some in stock.

Regards
Mark Jones