Spinner Wanted

Jonathan Wilkins · Post by **Jonathan Wilkins** » Tue Feb 19, 2008 9:54 pm

Im still seeking a spinner with backplate for my Turb. Does anybody have one kicking around the garage/workshop/hangar that needs a home.
The backplate needs 6 holes 50mm apart. The spinner needs to fit a small 2 blade prop and be around 200mm in length. Probably a microlite or Eurostar type??

Phil Burgess · Post by **Phil Burgess** » Tue Feb 19, 2008 11:19 pm

I have a dome type spinner available if that would suit... It is for a VW engine and is the type that sits within the edges of the prop boss and is about 6 inches in diameter. Probably about 6 or 7 inches long, chrome finnish. Appears to be unused.

Jonathan Wilkins · Post by **Jonathan Wilkins** » Wed Feb 20, 2008 8:22 pm

Thanks Phil but im looking for a full spinner, just to give the nose a slightly sleek finish......very un-Turb like i know.

Rob Swain · Post by **Rob Swain** » Fri Feb 22, 2008 3:50 pm

Phil, that dome one still available? I've mislaid the one for my VP1 project, and it was a bit moth eaten anyway.