EGT probes in VW installations

The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering

Moderators: John Dean, Moderator

Post Reply
cardiffrob
Posts: 370
Joined: Wed Jan 16, 2008 3:56 pm

EGT probes in VW installations

Post by cardiffrob » Sat Aug 08, 2009 12:22 pm

Has anyone any idea of the EGT limits and probe positions of VW installations? Does Aerovee or similar have a stated position for the probes (distance from valves or from head etc) and associated max EGTs.
There is obviously going to be a different figure for the EGT depending on the position of the probes and I wondered if I could copy a known installation to get accurate figures without burning out the probes.

Thanks




PS Thanks, Les, for the probes and gauge!!
Rob Thomas
034851

phil brookman
Posts: 73
Joined: Tue Aug 12, 2008 4:40 pm

egt

Post by phil brookman » Mon Aug 10, 2009 10:15 am

i will try and look at mine i have been using mine for around 300hrs and i seem to think about 100mm from combustion chamber -- 4 senders one guage and a switch

Post Reply