The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering
Moderators: John Dean, Moderator
-
vernon readhead
- Posts: 4
- Joined: Tue Mar 11, 2008 10:22 am
Post
by vernon readhead » Tue Mar 11, 2008 10:52 am
Hi,
I have some sheets of polycarbonate which I think is 1.5mm tinted made by GE and is fitted to all shadow microlight, it came from the shadow factory when they packed up.
Regards Vernon
-
Bill McCarthy
- Posts: 488
- Joined: Mon Jan 07, 2008 4:06 pm
- Location: Caithness
Post
by Bill McCarthy » Tue Mar 11, 2008 3:35 pm
Wynton,
If you get in touch with the importers of the X'Air, they will put you right on the correct material. It looks to be the same thickness as fitted to my Sluka. "Lexan" seems to ring a bell.