Chris Lodge Props

Phil Burgess · Post by **Phil Burgess** » Thu Apr 03, 2008 5:14 pm

Does anyone know what the "104" stands for in the part number of lodge props? eg CJL 104 54x34

Failing that does anyone have a contact number or email for Chris Lodge himself?

Tony Harrison-Smith · Post by **Tony Harrison-Smith** » Thu Apr 03, 2008 7:31 pm

I don't have Chris's number on me at the moment, but he is listed in the inspectors list in Great baddow, Essex.

I hope this helps.

Tony

Rob Swain · Post by **Rob Swain** » Sun Apr 06, 2008 8:46 am

Well?

Did you find out? Don't leave us all just hanging here!

G-AWMN · Post by **G-AWMN** » Sun Apr 06, 2008 10:23 pm

I am in regular contact with Chris as he is the inspector for my Luton Minor rebuild project. I do not think Chris is to regular on the internet so probably has not seen this post. I will ask him about the "104" somtime in the next couple of days and reply with Answer.

Stuart

G-AWMN · Post by **G-AWMN** » Tue Apr 15, 2008 9:17 am

I have spoken to Chris regarding the "104". This refers to the drawing number. He has told me that he has about 56 different designs and all have there own unique drawing. Obviously if you require more details on this you have to speak to Chris direct.

Stuart

Phil Burgess · Post by **Phil Burgess** » Wed Apr 16, 2008 5:02 pm

I thought as much. I've tried to contact Chris several times but always manage to phone when he's out. I'll try again over the next few days.