Cabin heat

The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering

Moderators: John Dean, Moderator

Post Reply
stickandrudderman
Posts: 14
Joined: Mon Jul 26, 2010 7:22 am

Cabin heat

Post by stickandrudderman » Thu Nov 04, 2010 3:24 pm

Hi,
I'm in the middle of refurbishing a Falco F8.
Currently there's only warm air to the screen and not to your feet and I'd like to rectify this.
Can anyone point me at some hardware for splitting the 1" ID hose and controlling the direction?
Thanks

John Brady
Posts: 284
Joined: Tue Jan 08, 2008 8:39 pm

Post by John Brady » Mon Nov 08, 2010 5:28 pm

Try this lot

John

Rob Swain
Posts: 393
Joined: Tue Jan 08, 2008 2:11 pm

Post by Rob Swain » Fri Nov 12, 2010 10:48 am

I'll go with what John says but add that Light Aero (http://www.lasaero.com/) are agents for Aircraft Spruce. When just ordering a couple of small things it's a bit cheaper and a lot less aggro getting them shipped through LAS than direct from the US.
You look up the item on Aircraft Spruce, get the order code, and use that as the order code on the LAS site. Comes up with a confirmed price in £ for the item at the time of ordering too!
Rob Swain
If the good Lord had intended man to fly, He would have given him more money.

stickandrudderman
Posts: 14
Joined: Mon Jul 26, 2010 7:22 am

Post by stickandrudderman » Thu Nov 25, 2010 11:05 pm

Found it, thanks

Post Reply