Page 1 of 1
Jerry Can Pump
Posted: Sun Apr 06, 2008 4:56 pm
by Gary M
http://www.demon-tweeks.co.uk/products/ ... =DOLPFPEXT
Polarn Pump from Demon Tweeks + 1 m extension pipe
Saves scrambling up ladders with 20 L jerry cans.
Posted: Mon Apr 07, 2008 9:02 am
by gasax
They were advertised by a chap on Afors last year (somewhat cheaper I seem to remember!). Anyhow I'l pleased with mine, not the most robust bit of kit but so, so much easier than lifting cans.
Posted: Mon Apr 07, 2008 3:29 pm
by ian herdis
Is this a manual pump not clear from pic or description
Posted: Mon Apr 07, 2008 8:58 pm
by Gary M
Yes it is manual.
Posted: Mon Apr 07, 2008 9:48 pm
by gasax
Simple air pressure. Pump up the cylinder to pressurised the can and the fuel quietly flows into the tank. Not that easy to do it for a part can and you have to be careful to make sure that the pump sits properly on the jerry can spout.
But still pretty easy....
Posted: Wed Apr 16, 2008 10:34 am
by Mike Mold
Pretty simple in theory but I found the Polarn pump I bought only seals adequately on one of my five jerry cans and I need to make an additional air-tight gasket, in order to raise the fuel to my Jodel tank.