kt-70 Mode S

The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering

Moderators: John Dean, Moderator

Post Reply
mike lloyd
Posts: 8
Joined: Wed Jan 02, 2008 11:27 am

kt-70 Mode S

Post by mike lloyd » Sun Apr 20, 2008 9:35 am

does any one now if this transponder is the correct Mode s for the UK and europe
as i have a tray fitted already that i should just slide into
it seems much cheaper than all the other units out there
thank you
mike

Steve Brown
Posts: 257
Joined: Wed Jan 02, 2008 11:00 am

Post by Steve Brown » Sun Apr 20, 2008 9:52 am

I would guess it is ok as it is TSO'd - best check with CAA Radio Licencing to be sure - depending on your flying requirements (IFR? / certain airspace ) for basic Mode S ( elementary) you don't need data link - that is for enhanced Mode S.

King Quote (my bolds)

* NOTE: The KT-70 does not meet the ICAO Annex 10 SARPS mandate for Mode S datalink


SPECIFICATIONS
Size: 6.25"W x 1.63"H x 10.0"L Weight: 3.90 lbs.
TSO: C112, DO-181, DO-178A, DO-160B Temperature: -20 to +55C
Altitude: 50000 feet Display: Digital, Gas Discharged
Power Requirements: 11-33VDC, 35 W max Output Power: 200 watts peak pulse, minimum

mike lloyd
Posts: 8
Joined: Wed Jan 02, 2008 11:27 am

Post by mike lloyd » Sun Apr 20, 2008 10:01 am

have just found the CAA email for Mode S
thanks for the reply
mike

Steve Brown
Posts: 257
Joined: Wed Jan 02, 2008 11:00 am

Post by Steve Brown » Sun Apr 20, 2008 10:14 am


Post Reply