I used Oratex to cover my Fokker Eindecker which most people have seen, its tough stuff, I have been known to jet wash it when it gets muddy!
It is more expensive but VERY light and I am using it om my new Projec J SSDR which will be ready to test in a month or so
I have used Poly fiber on my Mustang tail feathers and its very good, but there is a lot of spraying/sanding/finishing with Poly fiber that you dont need to do with Oratex so its much quicker/cleaner.
Dave
Oratex?
Moderators: John Dean, Moderator
-
- Posts: 488
- Joined: Mon Jan 07, 2008 4:06 pm
- Location: Caithness
-
- Posts: 35
- Joined: Fri Jan 18, 2008 7:24 pm
Can't remember how much, it was not cheap, but I think once you add up all the "wet stuff" on traditional covering I bet there is not a lot in it. All you need with oratex is the covering, tapes, glue and an iron
Talk to Paul at the light aircraft company TLAC and he will give you a price
Dave
Talk to Paul at the light aircraft company TLAC and he will give you a price
Dave
036339
I've looked at the Oratex price list and it is scary to say the least but I take the point that it is a one hit wonder where no dopes and finishes are required to complete the job and a saving could be made there.
The thing that does make it expensive for me is the fact that if I do the wings and ailerons in Oratex and leave the tailplane and rudder untouched as they don't need recovering, the difference in finish will be very, very, noticeable and the unnecessary cost of covering the "rear end" as well just for appearance sake would be prohibitive.
I do however like the Stewart System as a means of applying ceconite and shall more than likely choose this method rather than seam cement and the fumes and time constraints that go with that method of applying fabric.
The thing that does make it expensive for me is the fact that if I do the wings and ailerons in Oratex and leave the tailplane and rudder untouched as they don't need recovering, the difference in finish will be very, very, noticeable and the unnecessary cost of covering the "rear end" as well just for appearance sake would be prohibitive.
I do however like the Stewart System as a means of applying ceconite and shall more than likely choose this method rather than seam cement and the fumes and time constraints that go with that method of applying fabric.
Roger Callow
033963
033963