Draughtsman wanted
Moderators: John Dean, Moderator
-
- Posts: 96
- Joined: Thu Feb 14, 2008 7:34 pm
Draughtsman wanted
We are trying to get drawings made from an existing crankshaft and a limited amount of original information from the manuals The laser scanning idea looks very expensive. So any retired techies out there want to fund their project by helping us out send me a PM. Autocad or Turnocad will be fine but we need someone who knows what they are doing.
027506
-
- Posts: 10
- Joined: Sun Jun 10, 2012 8:18 pm
- Location: Västerås Sweden, / Barrow in Furness, Cumbria
Re: Draughtsman wanted
Hi, im pretty handy with CAD, if you have the dimensions I can rustle up a comprehensive drawing including machining & hardening notations as required. However! in two days I leave for a two months travelling & work, so the earliest I can start is Feb 1.
-
- Posts: 96
- Joined: Thu Feb 14, 2008 7:34 pm
Re: Draughtsman wanted
Autocad,
That was very rapid learning curve I've had it for years and still struggle there are so many things to know and remember I will die of old age first.
That was very rapid learning curve I've had it for years and still struggle there are so many things to know and remember I will die of old age first.
Graham Dawes
028225
028225
Re: Draughtsman wanted
Rob, how are you getting on with this crankshaft project? I'd be interested to hear!
038429
-
- Posts: 96
- Joined: Thu Feb 14, 2008 7:34 pm
Re: Draughtsman wanted
I am about to gt a template cut to confirm the spline shapes. Once that is done the next thing it to get one made.
027506