I am preparing for the installation of my new Mikron III engine and need to speak to someone with Mikron knowledge. Right now I'm trying to find out what thread the oil pressure and temperature gauge senders need to be - are the threads BSP, metric or what?
The installation manual is not helpful: 'There is a screw joint at the pressure pump outlet providing for connecting of an oil pressure gauge' and, 'an oil temperature sensing element has to be installed into the suction pump return line.'
Please pm me if you think you can help
Walter Mikron
Moderators: John Dean, Moderator
Re: Walter Mikron
Dave,
have pm'd you, but perhaps worth checking with David Beale (Mew Gull in the Magazine) as he knows about Mikrons.
I do have a Mikron III overhaul manual but not detailed there.
regards,
Colin
have pm'd you, but perhaps worth checking with David Beale (Mew Gull in the Magazine) as he knows about Mikrons.
I do have a Mikron III overhaul manual but not detailed there.
regards,
Colin
018841
Colin Cheese
Colin Cheese
Re: Walter Mikron
Mr. Reid, did you purchase your Mikron III from Parmatechnik? I'm trying to get a price on a Mikron IIIB UL for my L-13 Vivat SE here in Huntsville, Alabama, USA
Thanks for any help you can offer!
Thanks for any help you can offer!
Re: Walter Mikron
I've answered Joe McKay's questions separately from the forum. I now have all the manuals and am making progress with the engine mounts etc. I'm happy to help if anyone needs to ask about Mikrons (mind you, the knowledge bank may be small, but at least there's more than in it than there used to be).
038255