Skyforce Locator
Moderators: John Dean, Moderator
Skyforce Locator
Would somebody with a Skyforce Locator installation manual, tell me which wires go where, to connect to a Garmin 100 GPS.
Many thanks
Les James
Many thanks
Les James
-
- Posts: 213
- Joined: Wed Jan 02, 2008 7:06 pm
- Location: East Midlands
Hi Les,
I bought mine second hand without manual but the notes I made when I installed it many moons ago may be all you need. I removed the 9v battery and shortened the plastic case and then glued the end of the case back on!
Red wire is +'tive supply
Blue wure is -'tive ground
connect green wire to blue , internally
yellow wire is data feed from the GPS
Hope this helps
I bought mine second hand without manual but the notes I made when I installed it many moons ago may be all you need. I removed the 9v battery and shortened the plastic case and then glued the end of the case back on!
Red wire is +'tive supply
Blue wure is -'tive ground
connect green wire to blue , internally
yellow wire is data feed from the GPS
Hope this helps
Richard
-
- Posts: 213
- Joined: Wed Jan 02, 2008 7:06 pm
- Location: East Midlands
Hi Les,
I bought mine second hand without manual but the notes I made when I installed it many moons ago may be all you need. I removed the 9v battery and shortened the plastic case and then glued the end of the case back on!
Red wire is +'tive supply
Blue wure is -'tive ground
connect green wire to blue , internally
yellow wire is data feed from the GPS
Hope this helps
I bought mine second hand without manual but the notes I made when I installed it many moons ago may be all you need. I removed the 9v battery and shortened the plastic case and then glued the end of the case back on!
Red wire is +'tive supply
Blue wure is -'tive ground
connect green wire to blue , internally
yellow wire is data feed from the GPS
Hope this helps
Richard
-
- Posts: 213
- Joined: Wed Jan 02, 2008 7:06 pm
- Location: East Midlands