Static mod

The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering

Moderators: John Dean, Moderator

Post Reply
paul330
Posts: 76
Joined: Tue Jan 15, 2008 1:37 am
Location: White River, South Africa

Static mod

Post by paul330 » Sun Jul 20, 2008 9:44 am

To save me re-inventing the wheel, does anyone have info on a static port mod submisson involving a machined/tapped port such as SafeAir/Avery/Aircraft Spruce offerings - preferably on a VANS aircraft.

As it's a pretty "standard" mod, I don't expect any issues but is there any specific flight testing or calibration procedure?

Specifically, I am fitting the SafeAir system to a RV10.
Paul Marskell
RV-10 ZU-IIZ
At Mercy Air, White River, RSA

Bearhawk Bravo QB under construction
Top
Post Reply

Return to “Aircraft Construction & Maintenance”