Page 1 of 1
2014 Aluminium
Posted: Thu Dec 10, 2015 8:53 pm
by ColinC
Hi,
I need to find a supplier for 2014 T651 aluminium in 0.25" and 0.19" thicknesses. Probably about 18" x 12" of the 1/4" annd a bit less of the latter.
Can anyone point me at a supplier?
Regards,
Colin
Re: 2014 Aluminium
Posted: Fri Dec 11, 2015 7:39 am
by nuggets
http://www.aalco.co.uk/datasheets/Alumi ... e_295.ashx
not sure what the smallest sheet size is they sell though !!
Re: 2014 Aluminium
Posted: Fri Dec 11, 2015 5:52 pm
by TRAZZELL
I went round the 2014 houses with the Menestrel and end up changing (with LAA Engineering blessing) to 2024T3. Might be worth looking at that option as Aircraft Spruce do 1/4" and smaller.
Tony
Re: 2014 Aluminium
Posted: Fri Dec 11, 2015 9:38 pm
by ColinC
Hi Tony,
Yes, that is much easier to source, sadly not suitable for this though.
[Correction: I suspect that the data I have been using for comparing the two is wrong in respect of 2024 and it may be acceptable after all.]
Will explain Sunday if you are around,
Colin