The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering
Moderators: John Dean, Moderator
-
Andrew
- Posts: 6
- Joined: Sat Aug 16, 2008 9:22 pm
Post
by Andrew » Sat Aug 16, 2008 9:37 pm
Hello All,
Where are you builders obtaining your .025" 6061-T6 in UK?
I bought my original alloy for my plans build from Aircraft Spruce some years ago. However I've run out of .025"
with just a 4' x 2' piece required to finish. Seems daft to fly one half way around the world if I can source a piece nearer to home. Does anyone know of a supplier in the Midlands? Or does anyone have some spare for sale?, I need 2 x 2' x 2' pieces of 6061-T6 .025" thickness.
Many thanks, Andrew. (Plans building a Ch701).
-
Andrew
- Posts: 6
- Joined: Sat Aug 16, 2008 9:22 pm
Post
by Andrew » Sun Aug 17, 2008 11:04 pm
Thanks for the link Welshman.
I have contacted them for a quote. I had heard mention of a company in Reading that sold to homebuilders but didn't know the name. I believe this must be that firm.
Regards, Andrew.
-
ivanmanley
- Posts: 136
- Joined: Fri Feb 29, 2008 8:10 am
- Location: Norfolk
-
Contact:
Post
by ivanmanley » Mon Aug 18, 2008 8:46 am
TW metals of Southampton have proved to be the cheapest in my searches. A full sheet of what you want would be around ?50 if they can tag it on to another import. Whether they'd have a small piece kicking around though? May be worth a try?
I don't have the number on me, but I've got it from directory services before.
Ivan
________
Video review
Last edited by
ivanmanley on Fri Mar 11, 2011 11:39 pm, edited 1 time in total.
-
Andrew
- Posts: 6
- Joined: Sat Aug 16, 2008 9:22 pm
Post
by Andrew » Mon Aug 18, 2008 4:36 pm
Ivan,
I will follow up your recommendation.
This camaraderie is most welcome and useful, free helpful advice from fellow aviators, brilliant.
Many thanks.
Regards, Andrew
-
Dave Johnson
- Posts: 8
- Joined: Sun Feb 24, 2008 1:23 pm
- Location: Faringdon
Post
by Dave Johnson » Sun Aug 31, 2008 10:54 am
Have you tried PFA Metals? I have used them and they seem to be efficient (they also give a bit of discount to PFA members - I don't know if that extends to LAA-LAAs)
Dave Johnson
-
Andrew
- Posts: 6
- Joined: Sat Aug 16, 2008 9:22 pm
Post
by Andrew » Mon Sep 01, 2008 11:48 pm
Thanks for the advice Dave
Regards, Andrew.
-
Ian Melville
- Posts: 1001
- Joined: Mon Feb 11, 2008 7:21 pm
Post
by Ian Melville » Sat Sep 06, 2008 2:19 pm
Information given on another forum indicates that there are a few questions I need to ask any supplier of aviation grade materials (i.e. 6061T6).
What paper work do I need to request from the suppliers to provide an audit to LAA engineering satisfaction?
Do I need to be sure that the supplier is au-fait with aviation procedures and standards. In particular regarding transit damage?
Cheers
Ian Melville
