Page 1 of 1
Rubber U channel
Posted: Sun Mar 12, 2017 12:22 pm
by tnowak
I need some thin wall U channel to go around the edges of an 1/8" thick perspex window.
Existing rubber is approx. 1/2" high and approx 1/16" thick on sides.
Anyone any ideas who may have something like this in UK?
Thanks
Tony
Re: Rubber U channel
Posted: Sun Mar 12, 2017 12:38 pm
by John Dean
These people should have what you need.
Re: Rubber U channel
Posted: Sun Mar 12, 2017 2:15 pm
by C Rule
Re: Rubber U channel
Posted: Mon Mar 13, 2017 7:59 am
by tnowak
Thanks. Will check with both.
Tony
Re: Rubber U channel
Posted: Mon Mar 13, 2017 8:18 am
by Ian Melville
I used these people for 1mm gap version for metal edging
Link to 3mm version
https://www.amazon.co.uk/Medium-section ... 62&sr=1-18
Re: Rubber U channel
Posted: Mon Mar 13, 2017 12:10 pm
by Harry Hopkins
Try Woolies who supply trim for vintage cars.
Re: Rubber U channel
Posted: Tue Mar 14, 2017 7:56 am
by tnowak
Thanks - will check all suggestions.
Tony
Re: Rubber U channel
Posted: Tue Mar 14, 2017 9:39 am
by Ian Law
Would this be any good? The available dimensions may not suit your needs ....
(LAS website: RAYRIM-8 or -9 )
https://www.lasaero.com/site/products/a ... =T01AQ76KL
I've often thought this could be handy stuff!
Ian