Jacking up a wood+fabric aircraft
Moderators: John Dean, Moderator
-
- Posts: 6
- Joined: Mon Oct 23, 2017 4:19 pm
Jacking up a wood+fabric aircraft
Just wondered how other owners had solved the problem of jacking up a wood+fabric plane ( Gardan Minicab for instance) that does not have any jacking points such as on the Pipers/Cessnas. Scissor jacks under the undercarriage leg look rather unstable as a way forward and gizmos like in the link below are a rather expensive option. Any help appreciated.
https://bogertaviation.com/collections/ ... ribal-jack
https://bogertaviation.com/collections/ ... ribal-jack
Tim Stephenson
042670
042670
Re: Jacking up a wood+fabric aircraft
I don't know if something like the ones in this Kitfox thread would be any good. Basically just some cheap bottle jacks and a bit of welding:
http://www.teamkitfox.com/Forums/showth ... light=jack
http://www.teamkitfox.com/Forums/showth ... light=jack
Paul Simmonds-Short
042301
042301
-
- Posts: 93
- Joined: Sun Feb 14, 2010 8:25 pm
Re: Jacking up a wood+fabric aircraft
How heavy is the Minicab tail end when on the ground? Can you lift it?
If so you might be able to arrange a couple of trestles/saw horses of suitable height and suitably padded, one to go under each wing and probably close to the root and probably aligned with a wing rib. Lift the tail (support on a third trestle) place the first two under the wings then lower the tail to let the wing trestles bear the weight. The tail can probably then be pulled or weighted down to lift the main wheels off the ground. I do this with my aircraft (not a Minicab) and have an anchor bolt into the hangar floor under the tailwheel for drawing down the tail and securing.
Even aligning the trestles with wing ribs you probably also would want to ensure the main spar was bearing on the trestles at all times.
If so you might be able to arrange a couple of trestles/saw horses of suitable height and suitably padded, one to go under each wing and probably close to the root and probably aligned with a wing rib. Lift the tail (support on a third trestle) place the first two under the wings then lower the tail to let the wing trestles bear the weight. The tail can probably then be pulled or weighted down to lift the main wheels off the ground. I do this with my aircraft (not a Minicab) and have an anchor bolt into the hangar floor under the tailwheel for drawing down the tail and securing.
Even aligning the trestles with wing ribs you probably also would want to ensure the main spar was bearing on the trestles at all times.
Donald McNicholl
006054
006054
- Chris Martyr
- Posts: 584
- Joined: Wed Dec 15, 2010 10:58 am
- Location: Horsted Keynes Sussex
Re: Jacking up a wood+fabric aircraft
Hi Tim ,
Do you have any specific maintenance tasks that you wish to carry out ?
It is this that determines where you jack the aircraft. Donald has given a very good account of where to place your trestles whilst manoeuvring , but you still need to jack the main gear.
If you have wheel-spats , then it's definitely best to remove them. Scissor jacks are probably the most adaptable as they tend to have a lower starting point than bottle jacks do.
But for anyone seeking advice that is 'type specific' , it is always best ask your Inspector .
Beats the hell out of getting a cracked [wing] rib , or damaging your undercarriage.
Sorry , about the 'double entendre'.
Do you have any specific maintenance tasks that you wish to carry out ?
It is this that determines where you jack the aircraft. Donald has given a very good account of where to place your trestles whilst manoeuvring , but you still need to jack the main gear.
If you have wheel-spats , then it's definitely best to remove them. Scissor jacks are probably the most adaptable as they tend to have a lower starting point than bottle jacks do.
But for anyone seeking advice that is 'type specific' , it is always best ask your Inspector .
Beats the hell out of getting a cracked [wing] rib , or damaging your undercarriage.
Sorry , about the 'double entendre'.
022516
Re: Jacking up a wood+fabric aircraft
Tim
For my Jodel D117, I used a couple of bottle jacks and some spare timber to to create the stands show at https://photos.app.goo.gl/89xY2xIwW65UwnmO2 , the idea being first attributed to John Brady. You might be able to adapt the design to your Minicab.
Mike
For my Jodel D117, I used a couple of bottle jacks and some spare timber to to create the stands show at https://photos.app.goo.gl/89xY2xIwW65UwnmO2 , the idea being first attributed to John Brady. You might be able to adapt the design to your Minicab.
Mike
Mike Mold (007106)
Jodel D117A G-BFEH, Watchford Farm, Devon
Jodel D117A G-BFEH, Watchford Farm, Devon
-
- Posts: 6
- Joined: Mon Oct 23, 2017 4:19 pm
Re: Jacking up a wood+fabric aircraft
Thanks for the ideas and photos. Info I'm now getting locally suggests the safest way is to winch the whole plane up on its engine mounts with a portable hoist and get a tressel under the forward bulkhead. Thanks for all of the ideas and photos, most useful for further reference.
Tim Stephenson
042670
042670