Rotec radials

The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering

Moderators: John Dean, Moderator

Post Reply
ROB. THOMASSON
Posts: 82
Joined: Mon May 14, 2012 5:36 pm

Rotec radials

Post by ROB. THOMASSON » Sun Aug 11, 2019 10:12 am

Does anyone know much about these? I've been on you tube and google but there's not a lot apart from one very disgruntled owner with a load of failures.
027506

Lewis
Posts: 7
Joined: Mon Aug 09, 2010 8:28 am

Re: Rotec radials

Post by Lewis » Sun Aug 11, 2019 9:44 pm

I'd get a Verner!

Whilst the Rotec is a thing of beauty to look at, the reality is somewhat different!

I've had various discussions with Thierry (the disgruntled guy) about his failures trying to resolve issues on an R2600 in a G'Reg aircraft.

To say i'm not impressed with the product and its support is an understatement.

The G reg aircraft in question is flying great at the minute! but it is a finger click away from ordering a Verner come the next issue!
Adam Lewis
038262

ROB. THOMASSON
Posts: 82
Joined: Mon May 14, 2012 5:36 pm

Re: Rotec radials

Post by ROB. THOMASSON » Wed Aug 14, 2019 10:47 am

Is this the same Verner who had problems with a flat twin microlight engine some years back?
027506

Post Reply