Walter Mikron 3

The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering

Moderators: John Dean, Moderator

Post Reply
Rupert Hibberd
Posts: 2
Joined: Wed May 13, 2020 4:30 pm

Walter Mikron 3

Post by Rupert Hibberd » Wed May 13, 2020 7:51 pm

Help sought with jet sizes and adjustments on Walter Hobson carburretor on my 1960's Mikron 3. Does anyone have manual? Currently running sootily on a frame, needed for Currie Wot GAYMP restoration. Thanks

cluttonfred
Posts: 30
Joined: Tue Aug 14, 2012 10:45 am

Re: Walter Mikron 3

Post by cluttonfred » Wed May 20, 2020 2:56 pm

Have you tried contacting Parma Technik, even if you have to use Google Translate? https://www.parmatechnik.cz/contact/
*******
Matthew Long (LAA 039527), Editor
cluttonfred.info
A site for builders, owners and fans of Eric Clutton's FRED
and other safe, simple, affordable homebuilt aircraft

Dave Reid
Posts: 51
Joined: Sat Sep 12, 2009 2:25 am

Re: Walter Mikron 3

Post by Dave Reid » Thu May 21, 2020 12:42 am

Rupert, if you PM me your email I'll have a look and see if my Mikron manual (at the hangar) has the Hobson carb in it. Mine is a Jikov carb, so will be different. I have a contact in CZ who can help with the info too and is my go-between with Parma. Regards, Dave
038255

Post Reply