Wayne Osbourn Prop

The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering

Moderators: John Dean, Moderator

Post Reply
adamparnell
Posts: 11
Joined: Sat Dec 03, 2016 11:31 pm

Wayne Osbourn Prop

Post by adamparnell » Sat Sep 26, 2020 8:20 pm

Good evening all,

I'm trying to find out the pitch or any information on the following propeller which I know was fitted to G-BDEI?

Wayne Osbourn NP54-14OZ

thanks for any help in advance

David Hunter
Posts: 57
Joined: Tue Oct 18, 2011 7:38 pm

Re: Wayne Osbourn Prop

Post by David Hunter » Sun Sep 27, 2020 4:31 pm

That seems to be very close to the one on Taylor Monoplane G-BEVS. That one is marked NP54-15B and I think I am right in saying that the 54 is diameter in inches and the 15 is the angle of the blade at 75% radius. For VS it is given as 34" pitch, yours appears slightly finer. The "B" on VS refers to the fact that due to damage he had to make another one for me and the first was marked "A". Please get in touch if you think I can add anything. David.
005432

adamparnell
Posts: 11
Joined: Sat Dec 03, 2016 11:31 pm

Re: Wayne Osbourn Prop

Post by adamparnell » Sun Sep 27, 2020 6:39 pm

Thanks very much, thats incredibly helpful, have dropped you a message

Post Reply