Light Aircraft Association

Hi everyone,
Soon I will be looking to recover my Kitfox Mk2 fuselage with Oratex 600UL with backside coating.
May I ask what the preferred method is regarding what size and shape pieces to use ?
the bit that confuses me is the top piece from the turtledeck back to the vertical stabiliser where it transitions into a curve towards each side.
I think the bottom should be one piece and the sides one piece each.
Any hints or tips ?
Cheers.
Skelly.

I covered my Carbon Cub as you describe.
3 blankets; bottom first wrapped round the lower longerons and both sides overlapping onto the belly.

That requires some stretching and shrinking as you pull the fabric over the top stringer to tail fin junction. Finishing with a 2" wide tape covering the exposed edge.

Cheers Mark,

I think I have a decent idea of what to do now.

What could possibly go wrong...

Skelly.