Hi All
Just a couple of things that anybody can help me with?
I have a Skymap 3c that needs updating is this still possible i know its old tec but it will act as back up have tried the number in Chichester but no connection.
The second thing is i have purchased a MCR01 club and would like to get up to speed with servicing and talk through a few points with setting up the flaps and generally anything i should know about.
Help required
Moderators: John Dean, Moderator
-
Brian Hope
- Posts: 1271
- Joined: Tue Jan 08, 2008 8:28 pm
- Location: Sheerness Kent
Re: Help required
Hi Jeffrey, if you haven't done so already, have a look at the Type Acceptance Data Sheets (TADS) on this website. You can find them by clicking on Aircraft & Technical, then Data Library, and then Aircraft data sheets. The Dyn Aero MCR-01 Club is T301A.
There was an keen MCR owner who posted here regularly but unfortunately he doesn't any more. If you send me an email I'll pass on his email address so you can contact him directly. I'm sure he'd be more than happy to offer advice, he built his MCR and operated it for a good number of years.
brian.hope AT laa.uk.com
There was an keen MCR owner who posted here regularly but unfortunately he doesn't any more. If you send me an email I'll pass on his email address so you can contact him directly. I'm sure he'd be more than happy to offer advice, he built his MCR and operated it for a good number of years.
brian.hope AT laa.uk.com
014011