Does anyone have, and can advise on the usefulness of these small £180 ish CNC engraving machines? What and how is GRBL programming about?
I was well familiar with CNC programming 15 yrs ago before I retired, but seem to be somewhat out of date with this stuff.
Text engraving for switch/CB identifying labels.
Help please.
Engraving machines
Moderators: John Dean, Moderator
-
- Posts: 190
- Joined: Mon Feb 04, 2008 1:20 pm
- Location: Scotland
Engraving machines
018270
- Gerry Holland
- Posts: 149
- Joined: Wed Jan 02, 2008 11:00 am
- Location: White Ox Mead, Bath, Somerset
Re: Engraving machines
Trevor Hi.
I needed 6 separate labels for a upgraded panel and chose self adhesive Traffolyte White on Black Labels 25mm X 15mm but can be smaller. With VAT and Delivery was £13.00.
Take a look at this Company. They were extremely obliging even though a small order.
https://www.traffolytelabels.co.uk/traf ... ls/labels/
Regards
Gerry
I needed 6 separate labels for a upgraded panel and chose self adhesive Traffolyte White on Black Labels 25mm X 15mm but can be smaller. With VAT and Delivery was £13.00.
Take a look at this Company. They were extremely obliging even though a small order.
https://www.traffolytelabels.co.uk/traf ... ls/labels/
Regards
Gerry
028138
-
- Posts: 190
- Joined: Mon Feb 04, 2008 1:20 pm
- Location: Scotland
Re: Engraving machines
Hi Gerry.
Thanks, I may try them. Though the notion of making them out of brass was my initial thought.
Spacing between CBS is a bit tight so needs thinking about ref size of label and text.
Thanks, I may try them. Though the notion of making them out of brass was my initial thought.
Spacing between CBS is a bit tight so needs thinking about ref size of label and text.
018270