WANTED - Wheels, axles and brakes for Evans VP-1
Moderators: John Dean, Moderator
-
- Posts: 88
- Joined: Mon Jan 07, 2008 8:39 pm
- Location: Nr. Colchester
WANTED - Wheels, axles and brakes for Evans VP-1
Hi,
Can anyone please help with some second hand, lightweight 5" wheels, axles and hydraulic brakes to replace the heavy and clapped out Beagle Pup ones on my VP-1?
If not, any suggestions as to where best to buy something new? Matco in the US is the only source that I have found so far.
Many thanks.
John Lindsay.
Can anyone please help with some second hand, lightweight 5" wheels, axles and hydraulic brakes to replace the heavy and clapped out Beagle Pup ones on my VP-1?
If not, any suggestions as to where best to buy something new? Matco in the US is the only source that I have found so far.
Many thanks.
John Lindsay.
-
- Posts: 370
- Joined: Wed Jan 16, 2008 3:56 pm
-
- Posts: 370
- Joined: Wed Jan 16, 2008 3:56 pm
Pics coming. 3/4 hollow spindle, 3 inch radius, 3.5 inch between rim edges, drum brakes, sealed bearings, 6 lbs weight each side including heavyweight steel spacer and heavy steel castelated nut. Both could be replaced to save about 3/4 lb? All new.
I got your answerphone calls but have been on 'evil nights' at work.
Hope to have the pics loaded later tonight.
Rob
I got your answerphone calls but have been on 'evil nights' at work.
Hope to have the pics loaded later tonight.
Rob
-
- Posts: 370
- Joined: Wed Jan 16, 2008 3:56 pm
Just got a new cable after snapping the old camera cable off.
Pics are at.... http://s82.photobucket.com/albums/j279/foggythomas/
Pics are at.... http://s82.photobucket.com/albums/j279/foggythomas/
-
- Posts: 79
- Joined: Sun Jan 13, 2008 7:49 pm
- Location: Southampton
- Contact:
-
- Posts: 88
- Joined: Mon Jan 07, 2008 8:39 pm
- Location: Nr. Colchester