I am after some replacement brake shoes / linings to fit 4" drum brakes. These brakes are very small (off an old kart I think) and the shoes have a width of only 3/4" (1.9cm).
Cheers
Gary
WANTED: Brake Linings / Shoes to fit 4" Drum Brakes
Moderators: John Dean, Moderator
- Gary Hancox
- Posts: 16
- Joined: Sat Jan 19, 2008 12:09 am
- Location: Norfolk
-
- Posts: 79
- Joined: Sun Jan 13, 2008 7:49 pm
- Location: Southampton
- Contact:
Probably a bit too far for you, but I got my SIPA brake linings made from scratch with the help of Kimber Frictions, Southampton. There is a chap there who makes them specially to order and I don't think there is a brake shoe or pad he can't manufacture. You might like to try a similar company locally to yourself as I stumbled across this one by chance.
Hope this helps.
Andrew
Hope this helps.
Andrew
034852
Not sure if this helps but for many years I have been using "Saftek" to re line the brake shoes of vintage motorcycles. They offer a range of materials. I send the old shoes by post with a cheque. They strip off the old linning and then thoroughly clean the shoes, then new linings are bonded and baked into place. Never had a problem and oftain had re-lined shoes returned in 3 days.
Stuart
http://www.saftek.co.uk
Stuart
http://www.saftek.co.uk
- Gary Hancox
- Posts: 16
- Joined: Sat Jan 19, 2008 12:09 am
- Location: Norfolk