Has anyone got a small piece of 2024-T3 (or equivalent - the US plans say 24ST) that they would be prepared to part with for a suitable consideration?
I need two short lengths 3/16" thick by 1" wide by 5" long, or a larger piece from which I could cut them. They are for use as 'radius blocks' in between the steel reinforcing brackets on an Evans VP-1's undercarriage attachment.
Any offer, or suggestion as to where I might find such material, most gratefully received.
John Lindsay.
Wanted: Small piece of Aluminium
Moderators: John Dean, Moderator
-
- Posts: 88
- Joined: Mon Jan 07, 2008 8:39 pm
- Location: Nr. Colchester
-
- Posts: 75
- Joined: Tue Aug 12, 2008 4:40 pm
alloy
i have some 700 series alloy you will need to machine down 07910 235 321
phill
phill