I,ve just purchased a new aircraft recently and noticed when flying her back that when the Microair 760 radio is switched off, communication between P1 & P2 is excellent via the Sigtronics intercom, BUT, turn the radio on and volume is reduced by a good half but radio reception is bloomin loud.
Can anybody steer me into solving this problem or is it the design of the systems.
Headsets used have been DC H10 13.4 (NON ANR) and also Zulu lightspeed.
thanks
Ade
Reduced volume in headsets when radio is turned on.
Moderators: John Dean, Moderator
- Adrien Kentzer
- Posts: 7
- Joined: Sun Jul 11, 2010 11:13 am
- Location: Sheffield
- Mike Cross
- Site Admin
- Posts: 228
- Joined: Fri Apr 04, 2008 10:24 am
Look at the installation instructions for the Sigtronics intercom, which covers this point. It involves inserting a resisitor and works fine.
Details here though you may have to search the website if yours is not one of the ones this applies to.
Details here though you may have to search the website if yours is not one of the ones this applies to.
030881
- Adrien Kentzer
- Posts: 7
- Joined: Sun Jul 11, 2010 11:13 am
- Location: Sheffield
-
- Posts: 64
- Joined: Tue Dec 09, 2008 6:28 am
Headsets
Hi Polski,
Are you using two types of headset simultaneously? If so, they may have different impedence. Use a matched pair of two identical headsets. That might fix the problem.
Are you using two types of headset simultaneously? If so, they may have different impedence. Use a matched pair of two identical headsets. That might fix the problem.