Generator overvoltage

The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering

Moderators: John Dean, Moderator

Post Reply
dave11allen
Posts: 2
Joined: Tue Sep 10, 2013 4:42 pm

Generator overvoltage

Post by dave11allen »

I am stumped and would appreciate some advice!, I have a Bolkow Junior with a new Battery, a freshly overhauled Generator and a Zeftronics voltage regulator (correctly flashed) but when started the voltage keeps rising through 17 volts. - Nothing too "tecky" please.
User avatar
Alan Kilbride
Posts: 311
Joined: Sun Jan 13, 2008 4:41 pm
Location: York

Re: Generator overvoltage

Post by Alan Kilbride »

Have you checked your voltmeter?
037174
Peter Thompson
Posts: 3
Joined: Mon Dec 17, 2012 6:15 pm

Re: Generator overvoltage

Post by Peter Thompson »

The Zeftronics regulator mounting MUST include a really solid, low resistance earth. Sorry if I'm stating the obvious
I have the same combination, also on a Bolkow and the voltage regulation is superb.
dave11allen
Posts: 2
Joined: Tue Sep 10, 2013 4:42 pm

Re: Generator overvoltage

Post by dave11allen »

Peter, sorry to be so slow in getting back to you but all has been resolved. The problem lay in the switch as the field circuit was apparently earthing due to close contact with an adjacent CB.
Post Reply