can these in any way fail-- so as to stop flow of fuel going through them ..
type is 40--105 low pressure unit cube shape type
they apparently are some kind of solenoid type pump
tia
phill
facet fuel pump failure
Moderators: John Dean, Moderator
- Kevin Dilks
- Posts: 46
- Joined: Tue Apr 07, 2009 6:21 am
- Location: leicestershire
facet pumps
In theory they should always flow fuel but as there is no inlet filter may be it has some crud blocking it. BTW what engine is this on? as I have tested this pump but at full throttle on a 912 S it does not flow enough and actually drops the fuel pressure when switched on. Please bear in mind this is a FULL throttle. I know what they claim as the fuel flow but this seems a bit optimistic.........
Kevin
Kevin
-
- Posts: 75
- Joined: Tue Aug 12, 2008 4:40 pm
facet fule pump
have you had a look inside one
i am realy wanting to know if or when it stops or fails , is there any way it will stop fuel flowing through it....
i have another pump upstream of it so this aspect is realy important
or i will go to a split 2 pumps on 2 different circiuts
phill tia
i am realy wanting to know if or when it stops or fails , is there any way it will stop fuel flowing through it....
i have another pump upstream of it so this aspect is realy important
or i will go to a split 2 pumps on 2 different circiuts
phill tia
- Kevin Dilks
- Posts: 46
- Joined: Tue Apr 07, 2009 6:21 am
- Location: leicestershire