Page 2 of 2
Posted: Thu Feb 04, 2010 5:58 pm
by Stuart Ord
Bill,
Sorry, work is taking over (work being the curse of the non-retired flying classes)
It's an 1834cc VW
Posted: Thu Feb 04, 2010 6:24 pm
by bertdeleporte
A few links you may find valuable:
http://www.almet-metal.com/documentations.html,
download the "parachevemet" file, page 8 you have some elbows I'm thinking of. Go to any industrial piping company, they will tell you where to find what you are looking for.
Other ideas:
Car tuning:
http://www.gt2i-competition.com/index.p ... 0c&&page=3
truck bodybuiders:
http://www.todd.fr/web/menuCiterneprodu ... atiques.do
Bottom of page, you have:
603617200 COUDE ALU 90 D=100/108
603617000 COUDE ALU 90 D50/60
D037244-00 COUDE ALU 90 DIAM 80/90
D038620-00 COUDE ALU SOUDE 2"
4x4 tuners:
http://www.equip-raid.fr/resultats.php? ... talogue=27
Happy track, plenty possibilities for me to achieve a good result with a little of workmanship if you stick to DIY (the most rewarding way
).
Bertrand
Posted: Thu Feb 04, 2010 9:39 pm
by Stuart Ord
Bertrand,
Many thanks, these look very helpful. I did look through some UK motorsport sites eg Demon Tweeks but didn't find anything suitable. You are testing my schoolboy French now; thank goodness for online translation services!
Stuart
Posted: Mon Feb 08, 2010 5:53 pm
by bertdeleporte
