EASA CS23

The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering

Moderators: John Dean, Moderator

Post Reply
Gavin Bell
Posts: 102
Joined: Fri Jun 11, 2010 8:12 pm
Location: York

EASA CS23

Post by Gavin Bell » Tue Sep 25, 2012 5:17 pm

I am looking at an exhaust system that is certified to EASA CR23. Does this have any bearing on it's clearance for use by the LAA on a permit aircraft or does it still require a full mod?

Thanks in advance

Gavin
038659
Top
Brian Hope
Posts: 1271
Joined: Tue Jan 08, 2008 8:28 pm
Location: Sheerness Kent

Re: EASA CS23

Post by Brian Hope » Wed Sep 26, 2012 8:28 am

Hi Gavin, suggest you talk to Engineering as much depends on the aircraft it is going to be fitted to. You may be able to fit it and just get a sign off from your inspector that it complies with 'good aircraft engineering practice' but if your aircraft is approved as a complete kit including engine installation, you will probably need to apply for a mod.
014011
Top
Post Reply

Return to “Aircraft Construction & Maintenance”