Anti Splat Oil Separator - Dynon Autopilot Fit

The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering

Moderators: John Dean, Moderator

Post Reply
GrahamFraser
Posts: 4
Joined: Tue Jun 06, 2017 11:39 am

Anti Splat Oil Separator - Dynon Autopilot Fit

Post by GrahamFraser »

Hi all,

Looking for a little advice. I have an RV8 with a Lycoming YIO-360-M1B fitted and was looking at the Antisplat oil separator as an option. I was wondering if anyone had any experience of this i.e. have one fitted on the same or similar engine airframe combination and if so were there any issues with the approval from the LAA.

Also, I have a Dynon D100 fitted and wanted to look at the Dynon AP-74 autopilot. Again does anyone have one fitted to an RV and can you share you thoughts please.

Many thanks
johnmichie
Posts: 57
Joined: Wed Jan 07, 2009 10:35 am
Location: White Waltham

Re: Anti Splat Oil Separator - Dynon Autopilot Fit

Post by johnmichie »

Graham

Contact me off forum.I have a Dynon D10A, electronically and electrically identical to the D100, and an AP74 driving Dynon servos.

Repeat your question on the http://www.rvuk.co.uk forum, where you will get more replies and I can reply more easily.

John
026963
GrahamFraser
Posts: 4
Joined: Tue Jun 06, 2017 11:39 am

Re: Anti Splat Oil Separator - Dynon Autopilot Fit

Post by GrahamFraser »

Thanks John, will do!

Regards

Graham
Post Reply