Hi,
Please would someone forward me the list of approved props, hubs and engines? I'd like to check if these are approved for the IO-360:
The hub model is HC-C2YR-1BF and the hub serial is CH18351. The blades are F7666A-4. Serial numbers for the blades are 30137 and 30024.
Many thanks
Gary
Prop approved list
Moderators: John Dean, Moderator
Gary,
The published list is on
the engineering section
The list is a bit out of date, so you may need to check with engineering.
If that's the new Hartzell blended aerofoil, then I think Hartzell recentl published a list of tested combinations, which should help with your application.
The published list is on
the engineering section
The list is a bit out of date, so you may need to check with engineering.
If that's the new Hartzell blended aerofoil, then I think Hartzell recentl published a list of tested combinations, which should help with your application.
Gary,
This ( http://www.hartzellprop.com/kitplane/index_kitplane.htm ) may help you. It's not just prop to engine certification. You also need to check airframe, engine, prop combination. Example:
http://www.hartzellprop.com/kitplane/ki ... turer=Vans
Regards,
Tim
This ( http://www.hartzellprop.com/kitplane/index_kitplane.htm ) may help you. It's not just prop to engine certification. You also need to check airframe, engine, prop combination. Example:
http://www.hartzellprop.com/kitplane/ki ... turer=Vans
Regards,
Tim