Bracing Wires and Tangs.

The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering

Moderators: John Dean, Moderator

Post Reply
Bill McCarthy
Posts: 488
Joined: Mon Jan 07, 2008 4:06 pm
Location: Caithness

Bracing Wires and Tangs.

Post by Bill McCarthy »

Can someone point me in the right direction to a link - I need to get new tail bracing wires and tangs made up.
Thanks
Bill
Top
User avatar
ColinC
Posts: 406
Joined: Tue Jan 08, 2008 5:05 pm
Location: Derbyshire

Post by ColinC »

suggest: http://www.bruntons.co.uk/
018841
Colin Cheese
Top
Bill McCarthy
Posts: 488
Joined: Mon Jan 07, 2008 4:06 pm
Location: Caithness

Post by Bill McCarthy »

Thanks Colin, I went on their website but they don't appear to have the same type of wire adjuster to mine (mine are like a long stirrup fitting with a screw adjuster on it) and can't find tangs either. There used to be a link to a spares outlet for American fittings.
Top
Nigel Ramsay
Posts: 298
Joined: Mon Feb 25, 2008 5:13 pm
Location: Middle Earth

Post by Nigel Ramsay »

Bill, Bruntons are very co-operative, I used them to make tail-wires for the T Craft, they even sent their sales engineer to see me in Southampton! You could ask them at least.
Top
Post Reply

Return to “Aircraft Construction & Maintenance”