Acro VW 1834 Fuel Flow- FRED

The place to raise issues, ask questions, swap ideas and discuss anything related to aircraft engineering, maintenance and building.
NB Any opinions expressed in this forum are not necessarily those of LAA Engineering

Moderators: John Dean, Moderator

Post Reply
MarkSharp
Posts: 28
Joined: Tue Apr 20, 2010 12:22 pm

Acro VW 1834 Fuel Flow- FRED

Post by MarkSharp »

Hi folks,

Could anyone provide me with the theoretical max fuel consumption for this engine in order to prove adequate fuel flow to the carb. Its for a long dormant FRED project of a late family friend (see other thread from my partner in crime). The tank is on the wing centre section, so I'm hoping there is enough gravity head to dispense with the mech fuel pump.

Thanks,
Mark Sharp
peterg
Posts: 4
Joined: Thu Jul 07, 2011 1:16 pm

Re: Acro VW 1834 Fuel Flow- FRED

Post by peterg »

I suggest Barry Smith, at Yearby, would be the man to ask!
Look at www.acro.co.uk. Good luck.
Peter Gilmour
038777
Neil Spooner
Posts: 24
Joined: Wed Jan 07, 2009 5:22 pm
Location: Colchester, Essex

Re: Acro VW 1834 Fuel Flow- FRED

Post by Neil Spooner »

Most of these engines burn 15-20LpH. Assume double that & you have plenty of reserves.
The LAA provide a fuel flow check sheet via the technical link.
024282
Post Reply